STEP 2:

When enough fabric is ironed that it nearly reaches the floor, raise this end up and over the sleeve and down to where it meets the fabric as in photo.

STEP 3:

Continue advancing fabric in this manner. Use care that weight of fabric coming off the ironing board doesn't start pulling against the small amount of fabric that is draped over the sleeve, causing it to slip off and fall to floor. To avoid this happening, alternate advancing off ironing board and then downward over the sleeve in small advances until the portion over the sleeve is close to floor level.

STEP 4:

Begin fan folding remaining yardage over the sleeve until finished.

STEP 5:

Hold end of sleeve near stand and grab the stand under the black ring. Set stand aside.

STEP 6:

Using both hands, slide the sleeve off of the Extension Arm, being careful not to raise upward or downward.

STEP 7:

Transport to table . . .

STEP 8:

or fan fold ironed fabric over ironing board or table, then remove the sleeve.

STEP 9:

Shelf brackets are handy for storing fabric. Extra sleeves are available for multiple fabric, strips, or borders.